Help!!!!!!!!!!!!

[evil_stroke]

so i just got the head resurfaced and installed the new copper head gasket....let it set and started it up..... it now leaks a little bit outta the head but is also leaking everywhere else so i think the compression blew the rest of the gaskets out...im goin to order a complete gasked kit from cometic gaskets but don't know what to get....it is stock bore and i dunno what that is it think its 88mm but not 100% any information you guys can help me with would be greatly appreciated thanks

[oldschoolzuk]

Get an OEM gasket and be sure to put the crown side down ..

[FPMXer]

Just because you had the head redone doesn't mean it's good. You also have to make sure the cylinder deck is flat and free of boogers also. When you say it leaks everywhere else too what do you mean??

[fastman69]

86mm is stock bore.

[evil_stroke]

yeah im actually gonna take the whole motor apart and get every surface finished.... and what i mean by everywhere else is it leaks by the return water hose on the under side of the motor and somewhere else down there to...its a pretty steady leak to.

[FPMXer]

That blows when your riding season is just starting. Git-Er-Done!

[oldschoolzuk]

It sounds like the bas gasket or water pump weep hole???????When you start the bike look and see where exactly its leaking from Take some talcom or baby powder and spread it all over your engine start it up and follow the water leaks.This will help you narrow down exactly where the anti freeze is coming from..

[evil_stroke]

Originally Posted by oldschoolzuk

It sounds like the bas gasket or water pump weep hole???????When you start the bike look and see where exactly its leaking from Take some talcom or baby powder and spread it all over your engine start it up and follow the water leaks.This will help you narrow down exactly where the anti freeze is coming from..

thnx i will have to do this right after work today i will let you know the outcome