LT80 thought

[Suzukispeed18]

does anybody know how to make an lt80 premix????

L8er

[bansheeracer18]

they don't make a kit that i know of but like i did with all my old 2-stroke dirt bike was take that oil tank off with the lines and if the line is held on with a bolt take it out and find another bolt to put in the make sure to use lock tight if it just a hose take about a 2 inch piece and thread a 6mm bolt in to it if that is to small or to big put a little bolt that will screw into the hose and put it back on the oil injector hose clamp the back to the spicut and disonect the cable from the oil injecter or buy like a RM 80 throttle cable or something like that a little throttle cable of a little stroke dirt bike that uses pre-mix hope that helps alway work 4 me

[370banshee]

if the injector is engien driven than make it not engien driven by removing the gear that drives it. if it's throttle driven then just undo the cabel to it and nip it of short or leave the cable in it's spot but take it off teh actuator for teh throttle. i know some polaris's have a lever inside that the cable hooks too. anywa that sohould do it then you can run premix. jusr=t make sure whatever you do it doens leak air. then you'll have a super super lean ring destroyin machine

[LT250Racer87]

Haha, heres a thought LT250r engine in an LT80!! AHHAA

but hey.. i saw one of those Trx90's on ebay with a 250r engine in it

that would be the tits.

[370banshee]

saw it and it looks cool. it also said it kept up with a modded shee!!!

[LT250Racer87]

well.. it might fly past it off the start.. but the shee would outsmoke it in the long drag.. i wouldnt feel safe on that fuckin thing hahahaha its so small.

[370banshee]

thats just what the auction said

[LT250Racer87]

yo 370 can you check out my thread i made, calling all lt250r owners

you have allot of insite on these things..

[370banshee]

yeah i'll give it a look