Flat side carb

[Slingshot560]

the flathead screw on the left side richens up the mixture, correct ?, turn in out out for more gas, the zilla is running very lean, might need some jets too, as for new jets what do you guys suggest ? thanx

[450Eater]

is it the stock carb?

[Slingshot560]

yep...im pretty sure its a flat side...right ?

[Flattrack]

The screw opposite of the choke lever is the Air mixture but only affects just off idle if your out more than a couple turns off the seat then some thing is wrong... As far as jetting you"ll have to do some plug chops to see where you jetting is for sure....then make the adjustments.with jet size or needle setting.....

[Banshee]

2 Turn full turns you are set right at your jet size. If you turn in 1 turn you go down 1 jet size. If you go out 1 turn you are up one jet size. I would suggest never going past 1 turn. If you have to get new jets. Usually you only want to use the air mixture screw for 1.5 - 2.5 turns anything else you should rejet. Also if you are just using the air mixture screw to test with be carefull going past 3 turn out. The spring looses tension on the screw and can back out and then its lost. Just a heads up.

[Flattrack]

You'r Right on the $$$$$.......

[Banshee]

Sweet how much $$$$ just subract it from my soon bill. heeheh