Stuff that swaps out

[92rslt1]

Originally Posted by fatls01

Can an 87 motor in an 86 frame? i need a motor for the 86

You will have to weld in a 87+ down tube on the frame. Its a good upgrade tho. You should just make a hybrid!

[92rslt1]

A third gen camaro headlight will fit in 500 and 250 headlight brackets. Wirng might change but it will work. I have a super blue in mine.

[fatls01]

thanks for the reply, but i found an 86 motor, gotta get it up and running for glamis soon.!! can't wait

[Camoman]

Any one,,,

Will an stock 1987 LT500 seat fit on a stock 1987 lt250r?????
It is the 'T' seat....The 500 looks more rounded....

[370banshee]

won;t fit.. the zilla seat is wider in teh back

[Camoman]

ok thanks man

[lt250racer]

If your looking for Aftermarket Footpegs, I do believe that the ltz400 & Kfx400 Sawp to the 87-90 years, & since the 87-90 footpegs fit monto the 85-86. The z00 & Kfx400 should work on the 85-86 also.

[terboed]

i have got a 03 z400 rear shock coming via ebay for my 91. auction ended at $15, not too bad if i do say so myself. cant wait to install it. since I've owned it, it has never had any damper whatsoever in the rear.

[terboed]

so, just got done installing the Z400 rear shock on my 91 lt250r. it took some time on the bench grinder to get it to fit the LT linkage but turned out good. the piggy back ressie rubs a little on the intake boot but nothing major. the ass end sits a little higher then before (maybe my spring was worn). for 15 bucks, you cant go wrong. the shock feels way better than the factory unit. this weekend it will have to prove itself at the dunes.

[gunrush128]

Does anyone know if a swingarm from an 87 500 will fit a 90 500?