Stuff that swaps out - Page 2

370banshee · #11 (**permalink**) 03-01-2005

i guess i could check it out also.. i have a lt250 and a lt500 ripped apart in the shop right now...

Kane · #12 (**permalink**) 03-02-2005

Probably get a quicker answer if you do it, 370. I saw the snowpile in front if the warehouse this morning, it's huge. My ambition dropped way down to an all-time low.

jwalkerblack · #13 (**permalink**) 03-02-2005

Gas caps from the Banshee and the Warrior are interchangeable with the LT250 (I believe it was 370 that pointed this out in a previous thread to attempt to give credit where credit is due), so that gives the LT owners a much better selection of afermarket caps especially if they are looking for a little bling for their cap

Banshee · #14 (**permalink**) 03-02-2005

Nope that was me that pointed that out. the banshee cap fit both the LT250 and 500.

jwalkerblack · #15 (**permalink**) 03-02-2005

Whoops my bad, I was trying to remember instead of actually going back and looking, that is what I get for being lazy!!

Banshee · #16 (**permalink**) 03-02-2005

I believe the calipers in the front of the 250 are the same as teh 500 but the rear is different. I am not 100% but I will check tonight.

370banshee · #17 (**permalink**) 03-02-2005

Quote:

Originally Posted by jwalkerblack

Gas caps from the Banshee and the Warrior are interchangeable with the LT250 (I believe it was 370 that pointed this out in a previous thread to attempt to give credit where credit is due), so that gives the LT owners a much better selection of afermarket caps especially if they are looking for a little bling for their cap

i'l take the credit.. haha oh yeah tecate4 and mohaev gas caps swap.. i got a lot of kawi interchange stuff.. but this is a suzuki thread

Kane · #18 (**permalink**) 03-06-2005

I called a couple aftermarket companies and they sell the same flywheel for both the LT's. I havent determined if the stator plates are the same but the individual coils and pick-up will interchange freely. If the plates themselves interchange, that would also mean the CDI's would as well.

flotek · #19 (**permalink**) 03-06-2005

i know a kid that put 230 quadsport rear hydrolic brakes on his older styled blaster with not much of any modifaction at all! zilla jugs swap out ,a popular mod is to upgrade your 87 jug with a 88-90 jug for various reasons (intake ,porting,to few head bolts) and the power valves on the 87-up lt250 and lt500 will swap as chris said earlier.though they changed marking on the side of pv adjust cover that used to say 250" on it.swingarms definitly swap up to 1989 on the lts. t bone seat will fit on 85 86 plastic on an lt. thats all i can think of right now anyways.

370banshee · #20 (**permalink**) 03-07-2005

i already said all that...