Stuff that swaps out

[killab18]

i know this is my first post and i have been seaching for a while. seach option on here doesnt work.

but will an 86 eng fit in a 87+ frame. We cant get the bottom mount bolt to go through and see that we need to weld in the front down bar. but other than that is there anything else stopping it from working?

[lt250racer]

I see people going in the other direction more often, but it can be done.
The major problems you will find is making the exhaust line up & making your front & bottom engine mounts.
The better option is to get or fix your 87+ engine, I know people tend to work with what they have, but I hahte seeing good frames getting hacked. They are going to become harder & harder to find.

[ccdhowell]

I have '06 LT-R450 pegs on my '90 LT250R. I drilled the holes out with a 1/2 inch bit and they bolted right up. The LTR peg doesn't rise up like the stock 250 pegs; great for us taller riders. I had to adjust the brake lever and the shifter.

[jsmstorm]

I was wondering about those I know someone was saying the Z-400 wouldnt quite work but def good to know!!!

[dkhargett]

i put a shee rear shock on my lt250r just had to mod the airbox

[jsmstorm]

I got another one the oil fill plug from the ltr450's works like a champ!!! No mods required just pull out the stock plastic crap and drop the ltr aluminum one in!!!

[Positive P]

Hey does anyone know of any 4 bolt hubs that will, fit in place of the 3 bolts that are on the LT80?