Stuff that swaps out

[RenLT250R]

Originally Posted by gh500

no it takes larger bearings

Can you use the 500 bearing in the 250carrier

[sblt500r]

the 500 axle is alot beffier than the 250. the 500 axle will not fit in the 250 bearing carrier. there is not enough meat in the carrier to bore them out for the larger bearings.

the 500 does use the same rear wheel hubs as the 88-92 lt250r though.

[Instigatr]

Originally Posted by Banshee

Ok so here it is I went through all of this information and compiled it. Don't yell at me if I missed something or put something up that is wrong. Just send me a PM.

If you have other information please PM me but only if you have physically done the swap. Lets keep this to the facts only and not what someone said can be done on another forum.

http://www.everythingquadracer.com/swap/

Let me know and lets keep adding to this page, I think it will be a huge help to people in 5-10 years

is this site still up? if not, can someone send me the info to my e-mail, or post a link where it can be found? man that would be real nice to have...
aaron

[superevil]

The clutch basket in an 87 rm250 is the same as the 87-92 lt250r's. The springs are different,but the inner and outer basket and the plate are the same,or at least they are interchangeable

[gh500]

i've used an 86 clutch basket & they interchange not sure about the 87 look it over real good

[Joelt250r]

what carbs switch out?

[superevil]

I meant the two baskets and pressure plate are the same i dont know about the friction plates. as for carbs,you can put a zilla carb on anlt250r,i think its 38mm?but you would be better of with a different carb

[azquadzilla]

will honda wheels fit on z400 hubs??

also burgard makes +3 a-arms for the zilla and custom swing arms.

[zillaguy89]

Originally Posted by superevil

I meant the two baskets and pressure plate are the same i dont know about the friction plates. as for carbs,you can put a zilla carb on anlt250r,i think its 38mm?but you would be better of with a different carb

I've got a factory zilla carb for sale with enough extra parts to build another...PM me for details

[SHOWED UP]

i ordered works shocks off of ebay for a harley big dog they were 13in eye to eye so i gave it a shot they look good (all chrome} and work fine on my 86lt