| ||||||||
![]() |
| | LinkBack | Thread Tools | Display Modes |
| ||||||||||||
| anybody try em??? they look liek they'd hook bad ass on a trail quad....
__________________ chris WANTED!! BANSHEE AND TECATE 4 PARTS motosynthetics.com for all your amsoil needs |
| Sponsored Links |
| ||||||||||||
| I've got the Knarlys on my LT250. They hook up pretty good but I'm going to try the Klaws next. The paddle tread hooks up so much nicer in my area.
__________________ 2002 Banshee Ported cylinders, ported reed cages w/Boyeson dual-stage reeds, Wiseco stock bore, Flotek .035 milled head, K&N intake adaptor and filter, Trinity pipes (for now anyway), +3+1 arms, Fox TRX450R front shocks Badass without the big bill 1987/90 LT500 Ported cylinder, ported reedcage w/Boyeson dual stage reeds, Wiseco 530 bore, Trinity pipe with custom fabbed silencer, Custom fabbed 144 front hubs and 115 rears with Motorsport Alloys Tork wheels, Sidewinder chain and sprockets, other stuff It's a Zilla, 'Nuff said |
| ||||||||||||
| i've ridden a banshee with the klaws.... it hooked up ok... but i was looking for some beefier tread
__________________ chris WANTED!! BANSHEE AND TECATE 4 PARTS motosynthetics.com for all your amsoil needs |
| ||||||||||||
| I'm debating Knarly's or Dominators for rear Blaster meats.....Would a 20x11x9 pose any clearance issues (rubbing) w/ a Douglas .190 or ITP T9? Not sure what the offsets are.......
__________________ |
| ||||||||||||
| I know one of the guys over on bansheehq swears by the kenda knarlys. he uses em for drags and hill climbing, cuts out every other row of tread. and they are pretty cheap on rocky mountain atv, like 40 or 50 bucks, thats pretty cheap for a name brand tire. and as for the holeshot gncc's, they are a pretty mean lookin tire. every time I go to the dealer to buy premix I always go and look at em for a minute. them suckers look like they would hook like a mofo, but at $85 it makes me walk away from em........... for now entill I decide to buy some
__________________ 86' honda 250R woods bike fresh motor as of sept. 9th 08' esr trx 5 pipe and silencer 38mm air stryker carb stock cyl. with 68mm wiseco piston (86') cr thin head gasket 180psi compression (stock head) 88' hot rods stock crank with spacer plate vforce 3 reed valve 01 cr250 ignition system +4 axle 13/38 gearing durablue lowering strut maier front and rear fenders |
| ||||||||||||
| i'm really thinkign about the knarleys still... as for claerance problems you'll be good ed... a stock blaster tire is a 21" i believe...
__________________ chris WANTED!! BANSHEE AND TECATE 4 PARTS motosynthetics.com for all your amsoil needs |
| ||||||||||||
| i'd get the knarlys, i have the klaws and i love them, i've tried holeshits, razrs, dominators, shredders, and mud sharks and imo the klaws are beter overall, i love these tires plus the reverse tread design is a major plus, im trying to get my dad to buy some knarlys for his scrambler 500. |
| ||||||||||||
| killer....the knarly's are availiable for a 10 inch wheel correct? I know one of the Kenda rear tire models is for 9 inchers only
__________________ sold all my toys. =( will have another banshee as soon as income allows |
![]() |
« Previous Thread
|
Next Thread »
| Thread Tools | |
| Display Modes | |
| |
All times are GMT -4. The time now is 02:10 PM.
Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.1.0 Credit Cards | Car Insurance | Tony Hawks Pro Mp3 | Buy Anything On eBay | Mortgage Calculator
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.1.0
vBCredits v1.4 Copyright ©2007 - 2008, PixelFX Studios
Copyright 2005 everything2stroke.com


















































Linear Mode
