| | |||||||
 |
| | LinkBack | Thread Tools | Display Modes |
01-19-2008
| ||||||||||||
| ||||||||||||
 Bearring Tool? is ther a tool to pull the bearrings from the front hubs?      |
| Sponsored Links |
|
01-19-2008
| ||||||||||||
| ||||||||||||
| On my rebuild I used a brass punch and a ballpin hammer. Works good!!!!
__________________ TS 2001 Banshee Flotek Dune port and milled head ProCircut Pipes K&N +4 timing 100w stator +2+1 a-arms, +4 Gforce axle, +2 swinger, steering stab V3 Reeds Fallen But Not Forgotten moose355@netzero.net 817-307-2352 |
|
01-19-2008
| ||||||||||||
| ||||||||||||
| Bfh........
__________________ chris     WANTED!! BANSHEE AND TECATE 4 PARTS motosynthetics.com for all your amsoil needs |
|
01-19-2008
| ||||||||||||
| ||||||||||||
| Quote:
|
|
01-19-2008
| ||||||||||||
| ||||||||||||
| Big Fucking Hammer your gonna wanna put something through the center and try and move the inner sleeve outta the way so you can catch the inner race of one bearing.. then your gonna wanna beat that with the BFH... that bearing will pop out.... oh and if your taking them out for powder coat or something like that... you will ruin the bearings on the way out sooooooooooooooooo put new ones in.. when you go to install the new ones... let temperaature work for you... get the hub WARM... warm to the touch is great.. and freeze the bearing overnight... they go in ALOT easier...
__________________ chris WANTED!! BANSHEE AND TECATE 4 PARTS motosynthetics.com for all your amsoil needs |
|
01-19-2008
| ||||||||||||
| ||||||||||||
| Quote:
|
|
01-19-2008
| ||||||||||||
| ||||||||||||
| a shop i worked at we used a electric skilet with engine oil, set bearing in the hot oil and it went in place then cooled and had to beat out. or put it in the freezer workes good just like 370 said, they cool very fast
__________________ ANDY  my 2000 blaster foam filter from toomey 4 degree key from dustin420 toomey b1 oil block off kit Boysen power reeds worn out stock front tires 20x11x8 razr bored .020 over 3mm stroker have flotek port and polish to match stroke this winter now that my 13 month vacation is over |
|
01-19-2008
| ||||||||||||
| ||||||||||||
| Hummm....seems like the bearing would expand & be harder to install
__________________ 1985 LT250R Quadracer Manufacture Date: 12-84 +8mm Hot Rod FloTek Drag/Dune port w/ Head Mod LA Sleeve STD Weisco Piston AAEN Pipe 1Dirracing Ported Reed Block w/ Secrets Keihin 39mm PWK Nology Pro Fire Coil & HotWires 7oz off FlyWheel Barnette Kevilar Clutch Kit UNI filter +2 +1 Chrome Burgard A-Arms +4 Chromoly Swingarm WORKS Fronts w/ Rezzys DuraBlue Rear Strut Billet Twin Row Carrier LSR Axcaliber +2 Axle & LSR Brake Hub "If your not scared, your not safe" |
|
« Previous Thread
|
Next Thread »
| Thread Tools | |
| Display Modes | |
Linear Mode
| |
All times are GMT -4. The time now is 03:58 AM.
Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.1.0 Record Internet Radio with Tags | Remortgage | Myspace Layouts | Forum | Debt Management
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.1.0
vBCredits v1.4 Copyright ©2007 - 2008, PixelFX Studios
Copyright 2005 everything2stroke.com
