Passion Racing Engines or Flotek

[rap720]

my 2000 banshee is ready for its 1st rebuild, and I want it to run like a street bike. I already have pwk33 mm carbs, cpi inframe pipes, and a 4 mill crank to start my rebuild. I do not want to run a spacer plate under my cylinder, but I want it to appear stock (no cool head). so the big question is passion racing engines or flotek for the machine work and porting. I am not looking for a drag quad at all, just a rediculously fast play quad, that looks almost stock.

[ONLY2STROKES]

well i have never had any work done by passion.i have had a couple motors setup bt FloTek.they work exaclty like denny said.run real hard and have been extremely reliable!i have seen some passion banshee's run at the track,they run real hard also.either way should have exaclty what you want.both great builders,from what i have experienced,seen and heard!!!

[xxxbansheexxx]

hmmm this is a hard one im not sure seeing that there both here i guess you probably will here from both and what they both have to offer oh and be ready for some wheelies

[RagunCajun]

Flotek ported my shee and lightened my flywheel. I got the video to prove it, it's one hell of a fun bike. Never seen passion's work though.

I guess if you go with flotek and want a nice playbike, youll be getting a port job like mine. Mine has a very broad and smooth powerband. Pulls hard on top too.

[nitrousbaby]

ive seen the work of both. and they both build supper fast bikes I like passions port design for the stroker. Chris 370banshee runs a passion racing bike. Your not gonna go wrong with either builder they both are honest on their prices and by the looks of the bikes that are running there setups you can tell they take alot of pride in their work.

[zillaguy89]

never ridden a flotek banshee......he did a great job on my quadzilla though.

370 banshee is a good buddy of mine, and the passion racing engine he has, is almost scary to think that kind of power comes from yamaha cylinders....its pretty nasty. PRE told him 80 HP, and its every bit of that, if not more in my opinion....

[369DuneBunny]

PRE builds a good stroker motor. and there's another design called x13....

[zillaguy89]

Originally Posted by 369DuneBunny

PRE builds a good stroker motor. and there's another design called x13....

That one's supposed to be even more badass than the 12 port right???

[rap720]

sounds like PRE is the way im gonna go. I just need to get the rest of my motor torn down, and the cylinders and head packaged up for shipping.

[369DuneBunny]

email jim about the x13. if he would recommend that over the 12 port for your 4mm crank