clutch instillation

[98_shee]

working on the banshee ..when putting a new clutch in i know you rotate the thin metal plates every 60 degrees but what order do they go in... i dropped them when i pulled the old ones out ... not real sure what order i put all the plates in..also need a torque spec. on the spring bolts not sure if this matters but i purchased the E.B.C. Kevlar lined clutch kit this is what I'm trying to put in

[Ed Gein]

Start with a friction plate, end with a friction plate........metal plates with cut-outs every 60 degrees (12 o'clock, 2,4, 6, 8, 10)....... Tighten clutch spring bolts to 10 Nm.....

[98_shee]

so the order would be friction plate..thin metal plate friction plate ...thin metal plate ...etc with all the disks in and friction plates..there is 8 friction plates & 7 thin metal plates