what do ya think

[banshee lover 2]

http://cgi.ebay.com/ebaymotors/YAMAH...spagenameZWD1V

do any of you guys run this kit on ur shee or know people who do, im thinking about getting it or would i be better off getting a cub, i ride dunes and run drags, do ya think its worth the money

[erik6767]

never seen that one.. savage420 has the 404 big bore from vitos i think it is, billet mono block i hear its prety nasty

[banshee lover 2]

oh yea, if i do get it im definately porting my bike, i wouldnt need an extended swinger would i

[flotek]

id suggest getting a + 4millimeter stroker for 400$ and have the cylinders ported for it ,run a set of shearers or CPI small pipes and you can get 75-80 horses with way more usable power with a much wider powerband than any cub and heck of alot cheaper to setup

[banshee lover 2]

yeah i was considering a 4mm for it and dune porting the jugs, i have t-5s on my shee right now but i can upgrade to better pipes to fit that setup

[flotek]

well for 400$ yo u might as well just Dune port it and lighten the flywheel and get a set of cpi or shearer pipes... yo u could likely get around 65 hp on the stock stroke on gas

[banshee lover 2]

what size carbs would you suggest, i was thinking 32mm keihin pj's

[banshee lover 2]

i plan on running 110 in it afterwards, yeah i was wanting to lighting the flywheel to, i already have a milled head

[flotek]

Originally Posted by banshee lover 2

what size carbs would you suggest, i was thinking 32mm keihin pj's

for a stock stroke dune 350 on gas i would suggest k&n clamp-ons with the 30mm oko keihin knock off d slide carbs .....or possibly dual 33 mm pwk keihins

[banshee lover 2]

thanks alot bro, ill contact you if i decide to go with that big bore kit so i can get my flywheel lightened and cylinders ported