| | |||||||
 |
| | LinkBack | Thread Tools | Display Modes |
10-09-2007
| ||||||||||||
| ||||||||||||
 Stripped lug nuts Hey Guys, I made a bit of a mistake and took an impact wrench with the wrong sized socket to one of the lugnuts on my banshee and stripped it out pretty good. I was planning on using an angle grinder and taking the nut off, or grinding the other end of the bolt off (backside of the hub). and buying a new stud (is it just a regular bolt type? bikebandit wants to charge 3$ for each one. and switch to new itp lug nuts. If anyone has any advice on this i would appreciate it. btw its the front hub.
__________________ I Almost Numchucked you, You dont even realize! 06' Banshee Toomey T-5's & 2:1 Foamy filter Flotek(EvilTwin) Dune Porting, Head milling, flywheel -12 oz bunch of misc crap 06 Blaster Toomey B1      |
| Sponsored Links |
|
10-09-2007
| ||||||||||||
| ||||||||||||
| take a cutoff wheel and cut down teh wheel stud and though the nut.. the nut will come off in 2 halves you'll need to replace the whel stud as well.... you'll have a very hard time getting to the back of the stud which is a special fastner.. the brake rotor is right in your way |
|
10-09-2007
| ||||||||||||
| ||||||||||||
| just grind down the sides of the nut till you can get a socket on it. thats what i did. that way you dont have to buy a new stud
__________________ TRX250R 86' frame - 89 motor grey mair shiney race cut plastic Duncan graffix kit Jensen oversized radiator Lagear antivibe stem Lagear +2 +1 arms +4 durable axle Works triple rate all round Itp Reinforced all around Razars all around desert tank tag x5 bars ims roll design pegs shitty FMF pipe & silencer(esr Trx-5 ready to bolt on) |
|
10-10-2007
| ||||||||||||
| ||||||||||||
| dude, put down the power tools and order a set of these. or goto your local sears or k-mart and buy a set. there regularly $20 but the link has them on sale for $10. just pound them on and the harder you wrench on them the more they bite in. you'll spend at least $40 in time and effort trying to cut away enough shit to get your wheel off and then you will have to replace the studs. with these you drop $20 and save the studs...dont be a tool, buy the tools... http://www.sears.com/shc/s/p_10153_1...52161000&cs=e5
__________________  |
|
10-10-2007
| ||||||||||||
| ||||||||||||
| pound the next size smaller socket onto the nut and then remove it... |
|
10-10-2007
| ||||||||||||
| ||||||||||||
| cr480 is right pound the smaler socket on. file away bit by bit till it seats properly.
__________________ '07 BANSHEE FMF SST's BOOST BOTTLE(it looks good) 300 MAIN JETS +4 TIMING VFORCE 3 REEDS PRO DESIGN AIR FILTER WITH BILLET INTAKE TRAILTECH FAT BARS WITH BILLET MOUNTS TRAILTECH COMPUTER KENDA KNARLY'S 21 INCH REAR ACERBIS HANDGUARDS  LOUD PIPES SAVE LIVES  IF IT AINT PREMIX YOU CANT BEAT ME 92% of teens have switched to rap music if you are part of the other 8% put this in your sig. |
|
10-10-2007
| ||||||||||||
| ||||||||||||
| swr has the best idea.. i forgot i own those tools he posted up.. they do work great too... you can get one fo the sets for $20.. thats what i bought |
|
10-10-2007
| ||||||||||||
| ||||||||||||
| Sweet i will let you know how it goes. Thanks guys
__________________ I Almost Numchucked you, You dont even realize! 06' Banshee Toomey T-5's & 2:1 Foamy filter Flotek(EvilTwin) Dune Porting, Head milling, flywheel -12 oz bunch of misc crap 06 Blaster Toomey B1 |
|
« Previous Thread
|
Next Thread »
| Thread Tools | |
| Display Modes | |
Linear Mode
| |
All times are GMT -4. The time now is 08:34 PM.
Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.1.0 Free Texting | Credit Cards | Halloween Around the Corner | Cheap Magazine | Property in Spain
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.1.0
vBCredits v1.4 Copyright ©2007 - 2008, PixelFX Studios
Copyright 2005 everything2stroke.com
