banshee question

[LT250RH]

old plugs can and will effect idle so will plug gap

[tdaddy]

so should i get new ones and wen u install new ones do they have to be gapped or no

[LT250RH]

yeah plugs are cheap and when you go to the parts store ask for a plug gapper there under a buck and gap bolth plugs to .025

[LT250RH]

also you need to fix your cap if its not making good contact to the plug it will do all kind of wierd stuff

[tdaddy]

ok thanks will be replacing plugs 2morrow my plugs are old

[atvfreestylekid]

So does it not idle at all? If so, there is a sensor that goes into the thumb throttle. Take the thumb throttle cover off and the sensor will slide up and out. see if it will idle then. as for the oil, I think you're ok as long as the plugs are not soaked.

[twinhowler]

Yea replace plugs, get your cap fixed, allign your carbs, you can do that by pushing the throttle all the way in and on each carb is a little glass window you see a round silver dot from the slide come in line with that window on each carb. and then check your sensor by your thumb throttle.
Let us know if you come right, oh yea 32:1 is perfect.

[tdaddy]

it doesnt idle it idles when i pull choke but for like thirty seconds because i think the slides drop pass the idle point and closes off the air and cuts off i think all i have to do is raise the slides
oh and the button in the throtte has ben removed and the tors and break cable has been cut