anybody w/ MRS pro raptor clutch lever?

[RagunCajun]

i got mine in today. Installation was a bitch. I have to use the hardest setting there is because the clutch cable is so short(OEM clutch cable im pretty sure). Then the little thing on the top of the perch that has a tiny point that goes into either of 3 tiny slots is all rounded out. When i pull in the lever, it turns. The thing that you turn to adjust is worthless because there is just a TINY bit extra so there isnt any slack to adjust.

I just want to get other's opinions on this lever that is used on a banshee.

here's some pics:
stripped part(not sure if that even effects how it works.
http://www.2sly4.us/rc/codys_stuff/M...r%20lever1.JPG
yeah it's bent:
http://www.2sly4.us/rc/codys_stuff/M...r%20lever2.JPG
another view:
http://www.2sly4.us/rc/codys_stuff/M...r%20lever3.JPG

The whole point of spending $44 on this was to get a lighter clutch pull. I will just go ahead and get a new clutch from flotek and go back to just 3hd springs instead of 6. Damn thing gives me a hand cramp. Perhaps a new cable too. This one has to be old. But hell, it works. Ill grease it up tomarrow and see what shee does.

[climb any hill]

Is it used? I ordered the same one but haven't installed. Lube the cable, should be smoother with 3 stock springs in place.
It will be easy to adjust with a loose cable [when you replace clutch]
I have no probs with pulling it, smooth on the ASV lever. Give me a couple weeks, I can let you borrow it if you wanna try it.

[flotek]

well you have ot use the closest setting for the super eazy pull effect or it wont be of any use,granted it is a pai nto instal l but it works really good dont give up! use a pair of large pliers to pull the cable taunt as you pull in and align it in the grroove ,its hard ot explain but theres a way to do it right and it really is an excellent product ,lube the cable really well

[RagunCajun]

i dont see how the clutch will have ANY play at all with it on the closest setting.

ill try tomorrow i guess.

[crazetoride]

get the 30 dollar msr clutch leaver from RMATV its the bomb digidie

[flotek]

gotta use the stock wheel roller threaded insert out of your yamaha lever perch cause its alot longer than the short msr one and fits right up so theres some adjustment otherwise the msr one is too dam nshort ,remember this is for dirtbikes and the cable length is different o nthem so yo ugotta jerr y-rig that wheel cable adjuster and youll be good to go Cody ,

[ky 2stroker]

http://www.rockymountainatv.com/prod...FamilyId=11631

order one of these and you will thank me later . my brother put one on his banshee with 6 hd barnett springs in it, made a huge difference in the clutch feel compared to the cheap 10$ clutch perch he had before. it makes it alot easier to pull without worrying about special settings and stuff, and overall the lever feels very strong and solid and just gives it a more postive feel like your actually pulling in the clutch, and not the feeling like your half ass stretching the cable and the clutch draging and stuff. I liked his so well that I bought one for my R, even through my other clutch lever was just fine to begin with lol.

[RagunCajun]

I used the stock roller thingy and it works fine. Thanks gents!

The pull is way better!