Chain roller

[mike250]

does every one on here with a banshee (that has stock carrier)take off that one roller so the chain fits on better? im just curios because that the only way i could get my new chain to work right. If so is their a down side to doing that ?

[Wacko Jacko]

no and yes, mine is currently on, because my chain is still somewhat new, but soon i will be in the same boat, once it stretches and its in that in between stage you are screwed and have no choice, you either gota run it real loose and hope you dont throw it, or knock a link out, take the lower chain roller out and run it a little tight till it stretches again, other options are keeping various sprockets on hand, which is a bitch of course, mine is kind of loose right now, but only has like 8 rides on it, i have no adjustment left and i know if i take a link out its gona be too short, so im gona put my 13 tooth front sprocket back on, then drop a link, then it shoudl fit on good with the chain roller still on

[mike250]

seems like a lot of bullshit do deal with dam. im going to ride it with no chain tensioner wheel and see what happens. If i have any problems im going to get a new swing arm and be done with it.

[Wacko Jacko]

just ride it like that untill it stretches a bit then put the chain roller back on, but yea roundhouse would be the way to go, thats the next big thing on my list

[mike250]

Sounds like a good plan.
Is that your girl on that black street bike? Shes hot does she have a sister? ..LOL

[dajogejr]

Guys, are you talking about the upper or lower roller or the chain stay on the back, I'm confused...

What gearing are you running that is causing you all these issues.

[mike250]

i am talking about the lower chain roller where the frame and the wing arm meet .(its the lowest roller out of the 3 )and im running 13 in front 40 in rear.