is that coolant on my pipe?

[Rideslikeagirl]

K heres the deal, my shee likes to drop coolant onto my pipes. from my understanding this is a sign of overheating? Its done it since I bought it. it seems like the resevoir bottle gets low pretty fast. on another note when I bored the jugs i got a lot of green coolant coming out but, the guy I bought it from gave me a jug of half gone engine ice? ive heard if you mix engine ice with regular anti freeze in can create clogs? that true? any help would be greatly apperciated! maybe i need a new cap?

[08 BANSHEE]

thats coming out the over flow i think mine did that once

[Wisers]

Head gasket? Are the heads tightend down right? when you open the rad cap is there bubbles in it?

[dajogejr]

Drain all your coolant out.
Take off any of the hoses and blow air through them to get the rest out.
YOu don't mix engine ice with anything....

I'm not saying that's the problem, but it's not helping.

If you don't have enough ice to fill the whole bike, use water and coolant 50/50 mixed (make sure it's aluminum safe coolant)

Get rid of that overflow bottle, or relocate it to the front of the shee. Air and coolant get trapped from the stock routing of the lines.

[wideopenracing]

mine does the same thing, i have it dripping down on the pipes from the overflow, and i only run 50/50 prestone/water
i think its my water impeller need to check it.
does it rattle kinda @ low rpm....if it does check it, mine gets hot to fast....and if im not flying through the trails or wherever im riding it will overheat....