brake calipers locked up

[s_tidey]

i'm new to this site so i'd appreciate a little help. i just bought a 04 blaster the guy said it needed new brake pads but lookin at it i can't get the calipers to relax there right against the rotor and there is nothin left of the pads at all. i tried to put some fluid in there but it wont leave the resevoir so maybe the master cylinder is shot? thanks

[sniperd]

Front or rear?

At the very worst i would drain all the fluid out and that should relieve the pressure and you can use new brake fluid (wouldnt hurt to change it anyway).

try using a screwdriver to wedge in there or use a C Clamp if it will fit.

I dont really understand how it wont come off though, did you remove the bolts holding the caliper? now just slide/use a mallet and get it off the rotor...

[s_tidey]

both fronts there is no fluid in them at all. i tried screw driver trick but pad is worn to the metal past the pad cant get in between. i took out pad screws there allen's wheres the caliper screws? thanks for help i'll look at it tommorrow

[s_tidey]

also i could use a service manuel for blaster that would cover 2004 if anyone knows of one i could download thanks