Oil block off queston

[02yamahablaster]

Let me start off by saying I am new to this forum. I just bought an 02 Yamaha Blaster with Toomey B1 exhaust, jet kit, and Uni filter and airbox filters. The bike is jetted with the supplied jets from toomey. I believe the main is a 310. I want to put the oil block off kit on it and premix the gas/oil. I was wondering if I run it 32-1 with Redline oil, will my jetting be ok? or is 32-1 to rich? I think the oil injection mixes at about 20-1 doesn't it? Thanks in advance.

[BlueDiablo]

it changes it mix ratio from what ive heard. the higher the rpms the more the oil. Im really not sure tho and that actually sounds kinda flaky when i think about it lol. 32-1 is fine its actually what most people run. as for your jetting...when i just had a toomey kit, i ran a 310 with no problems.

[dustin420]

with pipe, jet kit, and air filter a 300-310 main jet is what most ppl use, and for pre-mix 32-1 is perfect.

[02yamahablaster]

Thanks for the info guys, looks like I need to start pre mixing. The oil injection thing seems too flakey to me.

[BlueDiablo]

whenever you install the block off youll see why its so shitty.

[02yamahablaster]

yeah, isn't it driven by a plastic gear?

[BlueDiablo]

exactely...

[02yamahablaster]

Just ordered the blockoff kit from Trenga.

[revin-it02]

Originally Posted by dustin420

with pipe, jet kit, and air filter a 300-310 main jet is what most ppl use, and for pre-mix 32-1 is perfect.

i run a 260 main n 40:1 for premix

[dustin420]

u only run a 260 main jet, wow that seems kinda small to me, and 40/1 premix, is holy fvck, thats high every1 i talk to says 32/1 is perfect.