blaster tors question

[yamahamotocrosser40]

i have a 04 blaster and i had some problems with my tors( the wire that comes from the parking brake lever and runs to the wireing harness) it malfunctioned and i unplugged it will it be alright if i just either un plug it and tape it up or should i cut the plug off the the wire that comes from the parking brake and plug it in and then tape it or any other suggestions

[2002shee]

The TORS is the assembly that mounts to the top of the carb and kills the motor if the throttle sticks. The parking brake cut off is seperate. The parking brake cut off always have problems so just tape it off. For the TORS get a removal kit from Vitos and you'll be all set.

[yamahamotocrosser40]

thanks i was not taking the tors off i thought that was what it was called(that was what blue diablo told me what it was) thanks for setting me straight.

[2002shee]

TORS stands for "throttle overide system" by the way. I forgot to mention that.

[yamahamotocrosser40]

i new what it stood for but was not sure about where it was thanks

[skipzero]

Just take the brown and yellow wires and twist and tape together. Ya know uplug it and the side that goes to the motor(carb whatever) strip the wires and twist them together and your tors will be over ridden.