banshee spidles on blaster?

[joe22883]

Ok i want to buy a set of banshee spindles for teh blaster but im a lil confused.. i know i have read that they can be made to fit but how? The upper a-arm on the blaster the ball joint is not threaded. The blaster spindle is made to accomidate that type of set up with a none threaed ball joint. I was looking at some pictures of banshee spindles and it seems like you would need both ball joints to be threaed so you can use a nut on the other side. So how does this mod work?

[flotek]

i have never done it but i do know "only2strokes " has a set of good banshee spindles for sale if you find you want to try it out

[joe22883]

yea i do want to try it out but im curious how its done im gonna take a picture of the ball joint cause i have no clue how it works.. im wondering if teh 2003 up a arms are a little diffrent?

[joe22883]

plus i just sold the whole complete front hydro brake set up with spindles so i need to do somethign with it.. ill also be getting in tocuh with you about getting my cylinder head and flywheel done probably within the next week or so.

[joe22883]

here is a picture of it.. this is the upper a-arm ball joint

[370banshee]

if you get the 03-up balster spindles they bolt right up and use banshee brakes..

[joe22883]

well i know the blaster spindles would work but what about banshee spindles? ive heard people say they do but i dont see how it would work..

[joe22883]

And if i get a set of just blaster spindles can i just run the wheel on it with no rotor or brake drum just the hub ? or would i need some type of spacer to make up for the loss of brakes?

[370banshee]

i'm not sure how they pull that off..

[joe22883]

yea me neither..going to have to come up with something else i guess. i read somewhere on here about just a spindle mount wheel i think you where talking aout it..how does that work?