help please

[malpass]

i just got my bike back to gather rebuild top end this was my first time doing this but i got it all back togater and it started right up but it is idleing real high any idear y

[flotek]

either an airleak or your carb tube slide is hung up and not seating itself down in the body ,possibly tors related problem

[malpass]

what way is the tube supose to face on end i flat the othere end has a curve on it i thing it might be back wards

[SandGeek]

What kind of bike? Did you go bigger in the cylinder? Possibly a lean situation, probably not but could be. Check your reeds for cracks/chips. Back the slide adjuster screw out so you know the slide is seating. Without it running, take the air filter off and watch the slide action, make sure its smooth and going all the way down.

Like Eviltwin said, most likely to much air coming from somewhere.

[malpass]

its a blaster it stock size just honed the cylnder before i rebuilt it wonuld not idel so i messet with the tore screw under the seat what way should i turn the screw for less air