which wires?????

[NELSON]

I know someone has this stored in their brain. what i need to know is what to do with the wires when removing the tors. i have a new carb all i need to know is what do i do with the wire from the throttle and the wire that plug into the stock carb.please help. i have posted this more than once. someone know! i know you do! thanks chris

[NELSON]

thanks for nothing! i stole it off of blaster forum. didnt want to go there!

[gassrx.com]

just un plug them

[bfulton620]

i just did this last night! trace the yellow wires on the "plug ins" back to the little black box under the frame beneath ur handlebars.... remove the box, it should just be a regular philleps head screw driver bolt. then, each plug in should have a second wire, it is black(ground) and comes from the back of the bike.... cut them! cap the ends...... then take some wiring tape, and bundle the wires back together, and tape them up... as far throttle chord, i grabbed some pliers and yanked it out... then i folowed climb any's advice, and plugged it with cylicon....

a friend of mine didnt cap the end of the ground wires when he cut them.... i duno if its necessary, but i ride alota water and didnt want the ground wires getting wet!

[NELSON]

So just unplug the brain, the connector on the carb and on the throttle switch. easy enough if thats it. thanks . i am putting a blaster in my lt and i dont want it tonot start because of tors. trying to minimize problems.