E2S > Types of 2-Strokes > ATV's > Yamaha Blaster

Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 05-24-2008
Kudjan89's Avatar
Kudjan89 Offline
Newbie

 
Activity Longevity
6/20 4/20
Today Posts
sssssss51
Join Date: Dec 2007
Location: Michigan
E2S Coin: 12,631
Classified Rating: 0% (0)
Kudjan89 is an unknown quantity at this point
Default Wont Start!!!

i have a 2002 balster that i put away at the end of the last summer and it went into storage running.

i went to start it over the winter and i couldn't get it to do anything.
I have been trying to start it since january and it does not even want to start

i have tried everything to get it to start, shy of tearing it apart.

I have tried:
new plug, and a hotter plug
tore the carb apart twice to clean
new air filter
checked the reeds, stator, compression, and spark all good.

it gets spark and air, and the carb is getting fuel.

unless i am just really dumb and missing something obvious, it should be starting but it just isn't.

any input would be greatly apreciated.

thanks
Matt
__________________
'02 Blaster
Under construction, (winter project)

many mods coming!!!
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Sponsored Links
  #2 (permalink)  
Old 05-24-2008
mlglemon's Avatar
mlglemon Offline
Newbie

 
Activity Longevity
0/20 2/20
Today Posts
sssssss90
Join Date: May 2008
Location: New York
E2S Coin: 3,318
Classified Rating: 0% (0)
mlglemon is an unknown quantity at this point
Default

pour some fuel directly into the cylinder from the spark plug, see if it tries to pop a couple times
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #3 (permalink)  
Old 05-24-2008
O.J. Simpson's Avatar
O.J. Simpson Offline
I didn't do it

 
Activity Longevity
3/20 8/20
Today Posts
ssssss312
Join Date: Dec 2006
Location: Iowa
E2S Coin: 5,805
Classified Rating: 0% (0)
O.J. Simpson is an unknown quantity at this point
Default

make sure your key and kill switch is on run
__________________
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #4 (permalink)  
Old 05-25-2008
kxrider's Avatar
kxrider Offline
Tha One tha Only

 
Activity Longevity
0/20 7/20
Today Posts
ssssss669
Join Date: May 2007
Location: Louisiana
E2S Coin: 3,806
Classified Rating: 0% (0)
kxrider is an unknown quantity at this point
Default

try this put tha choke on and see if u can flood it out i had a problem after i clean my carb that even with choke it wouldnt even get fuel to tha cyl i had to clean tha carb 5 times also dont dump fuel into tha cyl cause it wont fire it act like it is flooded out cause thats what u did my suggestion is get some one to pull start u then u might be able to fire it up
__________________
1990 KX80 - being rebuilt and modded
1989 RM 250 - bored .020" over and ported with a FMF fatty and silencer
1996 XR l00R - also being rebuilt putting a 120cc big bore hot cam full BBR exhaust and all new plastics along with paint job


BEEN THERE-WRECKED THAT-AND FIXED IT


Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #5 (permalink)  
Old 05-25-2008
Kudjan89's Avatar
Kudjan89 Offline
Newbie

 
Activity Longevity
6/20 4/20
Today Posts
sssssss51
Join Date: Dec 2007
Location: Michigan
E2S Coin: 12,631
Classified Rating: 0% (0)
Kudjan89 is an unknown quantity at this point
Default

pull starting did not work, i still have yet to try to dump some fuel in the cyl.
__________________
'02 Blaster
Under construction, (winter project)

many mods coming!!!
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #6 (permalink)  
Old 05-25-2008
BlueDiablo Offline
Low and Slow

 
Activity Longevity
1/20 14/20
Today Posts
sssss3020
Join Date: Sep 2005
Location: PA.
E2S Coin: 4,689
Classified Rating: 0% (0)
Blog Entries: 1
BlueDiablo has a reputation beyond reputeBlueDiablo has a reputation beyond reputeBlueDiablo has a reputation beyond reputeBlueDiablo has a reputation beyond reputeBlueDiablo has a reputation beyond reputeBlueDiablo has a reputation beyond reputeBlueDiablo has a reputation beyond reputeBlueDiablo has a reputation beyond reputeBlueDiablo has a reputation beyond reputeBlueDiablo has a reputation beyond reputeBlueDiablo has a reputation beyond repute
Send a message via AIM to BlueDiablo Send a message via MSN to BlueDiablo
Default

re you gettin spark? take the plug outof the cylinder an ground it then get someone to kick it. if you get spark test your compression. whenever you pulled your plug out was it wet?
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #7 (permalink)  
Old 05-25-2008
flotek's Avatar
flotek Offline
flotekperformance.com

 
Activity Longevity
11/20 18/20
Today Posts
sssss9992
Join Date: Oct 2004
Location: pennsylvania
E2S Coin: 101,513
Classified Rating: 0% (0)
flotek has a reputation beyond reputeflotek has a reputation beyond reputeflotek has a reputation beyond reputeflotek has a reputation beyond reputeflotek has a reputation beyond reputeflotek has a reputation beyond reputeflotek has a reputation beyond reputeflotek has a reputation beyond reputeflotek has a reputation beyond reputeflotek has a reputation beyond reputeflotek has a reputation beyond repute
Send a message via Yahoo to flotek
Default

just cause its getting spark doesnt mena its in time with the stroke ,check your flywheel key and pickup sensor ,if pullstarting and fuel in the spark hole doesnt start it generaly that means theres surely something not right
__________________
CLICK BELOW FOR MY NEW SITE

http://flotekperformance.com/home


http://www.rjatv.com/
cheapest ^^performance parts online
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #8 (permalink)  
Old 05-25-2008
outtacontrol250r's Avatar
THEE ITALIAN STALLION

 
Activity Longevity
0/20 3/20
Today Posts
ssssss362
Join Date: May 2008
Location: ALTOONA , PA
E2S Coin: 3,556
Classified Rating: 0% (0)
outtacontrol250r has a reputation beyond reputeouttacontrol250r has a reputation beyond reputeouttacontrol250r has a reputation beyond reputeouttacontrol250r has a reputation beyond reputeouttacontrol250r has a reputation beyond reputeouttacontrol250r has a reputation beyond reputeouttacontrol250r has a reputation beyond reputeouttacontrol250r has a reputation beyond reputeouttacontrol250r has a reputation beyond reputeouttacontrol250r has a reputation beyond reputeouttacontrol250r has a reputation beyond repute
Send a message via Yahoo to outtacontrol250r
Default

Quote:
Originally Posted by flotek View Post
just cause its getting spark doesnt mena its in time with the stroke ,check your flywheel key and pickup sensor ,if pullstarting and fuel in the spark hole doesnt start it generaly that means theres surely something not right

hes right ^^ if its getting fuel and spark and it wont start under pulling the there deff somthing not right
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #9 (permalink)  
Old 05-25-2008
Kudjan89's Avatar
Kudjan89 Offline
Newbie

 
Activity Longevity
6/20 4/20
Today Posts
sssssss51
Join Date: Dec 2007
Location: Michigan
E2S Coin: 12,631
Classified Rating: 0% (0)
Kudjan89 is an unknown quantity at this point
Default

Quote:
Originally Posted by flotek View Post
just cause its getting spark doesnt mena its in time with the stroke ,check your flywheel key and pickup sensor ,if pullstarting and fuel in the spark hole doesnt start it generaly that means theres surely something not right

would having the advanced timing key affect anything?
__________________
'02 Blaster
Under construction, (winter project)

many mods coming!!!
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #10 (permalink)  
Old 05-25-2008
mlglemon's Avatar
mlglemon Offline
Newbie

 
Activity Longevity
0/20 2/20
Today Posts
sssssss90
Join Date: May 2008
Location: New York
E2S Coin: 3,318
Classified Rating: 0% (0)
mlglemon is an unknown quantity at this point
Default

i would try using the regular timing instead, if that's what you mean.....
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -4. The time now is 06:47 PM.

Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.1.0
Micose de Praia | Problem Mortgage | Buy PSP | Police Car Lights | Loans
vBCredits v1.4 Copyright ©2007 - 2008, PixelFX Studios
Copyright 2005 everything2stroke.com