carbon build up

[ayron26]

will carbon build up on top of piston cause extreme bogging out? the cover of the carb came off and i had to ride home with it off put it back on and tightened it down and bike is really boggy with no power, checked plug was full of carbon chaanged plug same performance took cylander off rings look fine as well as wall and piston except for about 2 mm carbon build up on top is this the problem and if so what is best way to clean?

[jsmstorm]

Yea man clean that shit off, I use a finer steel wool, or a green scrubby pad

[ayron26]

ok i cleaned off all the carbon and put new plug in and still runs the same it is sucking in air good and will idle no prob also will rev right up in nuetral but first and second will not even rev up enough for power band to kick in any ideas?

[NELSON]

CLEAN FILTER? intake leak? new build? wrong jets?

[ayron26]

same jets as before ran fine filter is clean , rings and everything look good would dirt in the carb cause this?

[ayron26]

ahh just took off outerwears and ka boom power explosion how do u clean those properly?

[NELSON]

I USE warm soapy water rinse good. spray with oil