Banshee A-Arms

[xxxbansheexxx]

yea you got a serious point so here is something for "a good price"
http://www.worksperformance.com/html...elers_trs.html

[xxxbansheexxx]

look on ebay
like these http://cgi.ebay.com/ebaymotors/CUSTO...spagenameZWDVW

[Wacko Jacko]

i bet those axis ride nice, they are longer than banshee shocks though. zach45 who used to b e a member here runs those same +3+1 asr arms that you have, and runs the yfz shocks which are the same length as the raptors im pretty sure, and his front end sits nice, real wide and nice ground clearance

[xxxbansheexxx]

they look like a good deal
what happened to his yfzarms

[ASRBanshee]

Originally Posted by Michael Jackson

keep the arms your crazy man! they just need maintenance like everything else, you can go to a hardware store and buy some zerks for like 50 cents a peice , drill, tap and install them if your that worried,, or just unbolt the arms from the frame every winter , and greese up the insides and put em back on, not a big deal, and get some works A T steelers if your on a budget, they come in dual and triple rate, with or without res's, and different options as far as adjustability, you will love them, i think your crazy runnin stock shocks on +3 arms, you must be bottoming out everywhere

The spring adjustment is to the hardest so its not that bad and great for the trails since it is a little soft

[xxxbansheexxx]

i would try to get the axis or any other after market shocks

[ASRBanshee]

I'll probably end up with Works

[Fastrthnu]

what is the lenght on your +3`s on the bottom arm from center of spindle ball joint hole to the center of the mounting bolt hole to the frame. I got some of these and I think they are +2 insread of +3 that I ordered. Or better yet for more accuaracy, from the end of the arm where the end screws in (as if it wherent there) to the center of the bolt holes.

[ASRBanshee]

Originally Posted by Fastrthnu

what is the lenght on your +3`s on the bottom arm from center of spindle ball joint hole to the center of the mounting bolt hole to the frame. I got some of these and I think they are +2 insread of +3 that I ordered. Or better yet for more accuaracy, from the end of the arm where the end screws in (as if it wherent there) to the center of the bolt holes.

There like 15 1/2 inches

[Fastrthnu]

perfect. mine are 14 1/2" everyone else with +2 has 14.5" too. they really screwed me.


as for shocks go with works if you ride quite a bit and race sometimes and elkas for all out.

Here are the ones I got for my "+3" a arms.