clutch help

[SpeedDogz]

clutch seam to feal good but it no lock out to let back wheel,s turn motor still turn to i have it setup right i think

[91LT250R]

I would help you, but I can't really understand what you're trying to say. I'll take a guess. You pull in the clutch, but the quad still tries to roll forward when the engine is running? If that's what you mean, you need to adjust the clutch. I'm assuming your clutch basket and plates are in good condition.

[odaen]

i think i need a few more beers to fully digest the original post

[flotek]

Originally Posted by SpeedDogz

clutch seam to feal good but it no lock out to let back wheel,s turn motor still turn to i have it setup right i think

ive had a case of beer tonight so here goes my translation for him :


my clutch has a good feel it on the lever ,but heres my problem: it doesnt release properly .This greatly concerns me due to the fact that i can clearly see the clutch is engaging and the motor seems to start and run just fine ,its my understanding i have installed my clutch correctly and have inspected it for any possible problems or defects ,thanks in advance for your replys .

[SpeedDogz]

ty (i guess i have to tak crank case cover off