blaster question!!!

[revedup04]

i have a 2002 blaster. and i was wonderin if there is a way to check to see if the oil jug on the back is workin or not. or if it would be better to just take it off. i heard that if you take it off and run mix that you gain a little power. is this true? like i said just what i heard dont see what difference would be. but thanks for any info.

[suzuki LT250R]

I would put the oil injection block off on then you know it is always getting the oil it needs. You will save a little weight too by not having that oil resivior on there to.

[370banshee]

if the oil injector quit working you'd know because the engien would lock up. if you ask me the injector setup works ok on a stock blaster. if you stick with the injectoer don;t use yamalube 2s that stuff is crap. get yourself some amsoil dominator and use that. its designed to work as either a injector oil or a 50:1 premix. if you deside to ditch the injector setup i can walk you through how to do it for free. don't waste the money on the block off kit.

[revedup04]

if i take it off what should i mix the gas and oil at? if you could please walk me throught it. thanks

[370banshee]

depends on what premix oil you use. you can mix amsoil dominator at 50:1. ans that will make it run great.

[blaster2000]

Originally Posted by suzuki LT250R

I would put the oil injection block off on then you know it is always getting the oil it needs. You will save a little weight too by not having that oil resivior on there to.

Yeah i asked the same question on here and was just told to put the oil injection block off on it. I'd rather do that than end up having to get the engine rebuilt.

[yfsrider]

i blocked my POS injector off. didnt bother buying the kit and it worked great. its really easy to do