bad things in case

[glowpowered]

i got my case on my yz80 apart and what i see is not good. first, in the tranny there is a ton of aluminum shavings from the clutch cover being ground out because the clutch boss nut came loose. and in the crank part there is a pile of bronze shavings or something, they look to be from the conrod, but im not sure. there is a little up and down and a lot side to side play of the conrond. i think i need the crank rebuilt. can i get that all done up; trued and welded... and where? the piston has a bunch of holes from something like a piece of ring. i am going to get the cylinder bored .060 over and i would like to try that nikasil thing, where and how much can i get that done for?

[holtzer1]

i would check with a local dealer, or valley cycles may be able to help you out with the nikasil. project blaster (valley cycles) would be who i would get ahold of, they have contact info on their main page i think.